Wednesday, December 7, 2022
Home3D Printing3D Printing Webinar and Occasion Roundup: September 11, 2022 - 3DPrint.com

3D Printing Webinar and Occasion Roundup: September 11, 2022 – 3DPrint.com


We’ve acquired a number of in-person occasions to let you know about in immediately’s roundup, as SMASIS, IMTS, and extra will likely be held this week. Webinars will concentrate on matters together with post-processing, utilizing additive manufacturing to enhance the provision chain, biomaterials, and extra. Learn on for all the main points!

September 12 & 14: The Expertise Stratasys Tour Continues

The Expertise Stratasys Tour continues this week, stopping first on the Lane Motor Museum in Nashville, Tennessee, with host TriMech, on Monday, September twelfth. On Wednesday the 14th, the tour heads to St. Louis, Missouri, the place CATI will host at Topgolf.

“Our cellular showroom presents a neighborhood, handy manner so that you can discuss with 3D printing specialists and see the most recent 3D printers, supplies and options from Stratasys. Study additive manufacturing companies from Stratasys Direct and uncover how your group can profit from 3D printing purposes.”

You’ll be able to register for the Stratasys Expertise Tour right here. Keep tuned for extra dates and places sooner or later!

September 12 – 14: ASME’s SMASIS 2022 Convention

From the twelfth to the 14th, ASME will likely be holding SMASIS 2022, its premier convention on Sensible Supplies, Adaptive Buildings, and Clever Techniques, in Dearborn, Michigan. Attendees are invited to share their good supplies analysis, facilitate product development, improve their data in specialised subject areas reminiscent of biomedical engineering, robotics, and supplies growth, and community with different researchers from universities, corporations, and authorities labs to search out their subsequent R&D companion or employer. A particular job truthful can even be held through the convention, in addition to the Pioneer Awards Banquet.

“ASME’s SMASIS convention brings collectively the worldwide good supplies, adaptive buildings, and clever programs neighborhood to debate technical developments which can be bridging the hole between science fiction and real-world engineering. This system is designed to not solely showcase the most recent analysis but in addition encourage significant dialogue in a cushty setting amongst attendees from academia, business, and authorities.”

You’ll be able to register for SMASIS 2022 right here.

September 12 – 16: 3D Printing Information Unpeeled

Our Government Editor Joris Peels, who’s additionally the Vice President of Consulting at SmarTech Evaluation, launched a every day information livestream referred to as 3D Printing Information Unpeeled. Every weekday at 9:30 am EST, Peels will get on LinkedIn Dwell and tells us, in 20 minutes or much less, what he considers to be the prime information tales from the 3D printing business that day, and why they’re necessary. A number of the tales in his roundup are ones we’ve lined at 3DPrint.com, and a few are usually not, however they’re all equally attention-grabbing and impactful.

The following 3D Printing Information Unpeeled livestream will likely be this Monday, September twelfth, at 9:30 am EST, and can proceed the remainder of the week on the identical time. You don’t wish to miss it!

September 12 – 17: IMTS 2022

For the primary time since 2018, the Worldwide Manufacturing Expertise Present (IMTS) is returning to Chicago! That is the most important and longest-running business commerce present within the Western Hemisphere, and is held each two years at McCormick Place. Business professionals from all world wide attend to expertise greater than 15,000 new machining applied sciences, uncover the most recent digital and conventional manufacturing improvements, and be taught the very best methods to unravel their very own manufacturing challenges. The present options over 2,000 cubicles throughout 9 pavilions, in addition to AM4U by Formnext, an Investor Discussion board, workshops and job outlets, the Girls Make Manufacturing Transfer specialty program, and way more. A number of members of the 3DPrint.com crew can even be attending IMTS 2022—search for us within the Additive Manufacturing Pavilion, West Constructing, Stage 3!

“IMTS 2022, which is able to run September 12-17, 2022, is the place the creators, the builders, the sellers, and the drivers of producing know-how come to attach and be impressed.”

You’ll be able to register for IMTS 2022 right here.

September 13 & 14: Automating Publish-Processing for Mission-Vital Elements

This Tuesday and Wednesday, the thirteenth and 14th, PostProcess Applied sciences is holding a sequence of webinars on “Tips on how to Get Mission Vital Elements into the Palms of Warfighters Quicker with Automated 3D Publish-Processing.” The corporate’s East Coast Enterprise Growth Supervisor, Jon Strible, will likely be presenting throughout three dwell broadcasts from the PostProcess lab, throughout which attendees can get a close-up take a look at how {hardware}, software program, and chemistry mix to realize automated, transformative finish half outcomes. You’ll have the ability to see options working dwell on the corporate’s proprietary AUTOMAT3D software program platform, and have interaction in real-time Q&A as effectively. Every webinar will concentrate on a unique help removing course of, with the ten am EST one on Tuesday about resin removing, the ten am EST one on Wednesday about FDM help removing, and the 11:30 am EST one on Wednesday about PolyJet help removing.

“Are you trying to get completed 3D printed components to the entrance strains sooner? See how automating the ultimate step of the 3D printing course of, post-processing, ensures excessive half high qualitydecrease lead occasions, and heightened repeatability/consistency for army purposes. Finally, getting mission-critical components into the palms of Warfighters sooner and enhancing mission readiness.”

You’ll find registrations signups for the three webinars right here.

September 13 – 16: Solid Tour Half Deux

Markforged continues its world Solid Tour Half Deux tour, that includes the Digital Forge, pints, and snacks, within the EMEA and APAC areas this week. First, on the thirteenth, the tour heads to the Auto Cluster Growth and Analysis Institute in Pune, Maharashtra, India with the Adroitec crew at 11 am IST, after which to Parramatta Rydges in Rosehill, NSW, Australia with SFDesign at 12 pm AEST the identical day. Additionally on the thirteenth, Markforged and gerenga (Thailand) Co., Ltd. head to Huai Khwang, Bangkok at 3 pm Indochina/Thailand time, and the corporate can even go to Mark3D in Haiger, Germany at 9:30 am CEST on the thirteenth. The tour stays within the EMEA on the 14th, visiting 3DInfinity with GS Expertise in Maldegem, Belgium at 9:30 am CEST, after which heads to Innova Techniques in Bromsgrove, UK at 10 am BST on the fifteenth. There can even be stops on the fifteenth at 3DZ in Madrid, Spain at 10:30 CEST and the Konica Minolta Showroom in Auckland, New Zealand at 8 am NZST. Lastly, on the sixteenth, Markforged heads to the Chemtron Showroom in Singapore at 10 am SST, and to Nuovamacut Automazione Spa in Bologna, Italy at 9:30 am CEST.

“We invite you to fulfill the platform that prints industrial components on the velocity of software program in particular person. The Digital Forge is a mix of software program, supplies, and printers that carry you sturdy and dependable options to your manufacturing ache factors.”

Keep tuned for extra dates and places sooner or later!

September 13: 3D Printing Funding Casting Patterns

3D Techniques is holding a webinar on “The Benefits of 3D Printed Funding Casting Patterns with QuickCast” at 5 am EST on Tuesday, September thirteenth. In the event you’d like to save lots of time, materials, and cash while you’re 3D printing patterns for funding casting, Evan Kuester, Principal Superior Purposes Engineer for 3D Techniques, will clarify how you should utilize Quickcast to take action. This answer can be utilized to supply high-quality, strong patterns with complicated patterns in hours, along with massive, light-weight, shippable ones as effectively.

“Study how 3D-printed funding casting patterns manufactured by way of the Quickcast® workflow may help your foundry or service bureau develop its buyer base. Evan Kuester will clarify what QuickCast is and the way its hollow-part casting strategy lowers prices and will increase velocity in manufacturing.”

You’ll be able to register for the webinar right here.

September 13: AM Materials Characterization Seminar

Additionally on the thirteenth, at 6 am EST (10 am GMT), Malvern Panalytical is holding a free on-line seminar about “Materials Characterization Additive Manufacturing.” 12 audio system from universities and business will current on associated matters, reminiscent of how materials characterization helps the sustainability agenda for steel AM; used steel powder renewal and characterization in AM; understanding polymer powder growing older by way of rheology and GPC; course of optimization of dual-curing resins in AM utilizing thermal evaluation, and plenty of extra.

“Specializing in the necessities and methods used to characterise and qualify supplies (and components) for additive manufacturing – polymers, composites, and metals. Netzsch and Malvern Panalytical can even be giving a sensible introduction to their key characterisation instruments for additive manufacturing, together with Thermal Evaluation, Particle Characterisation and X-ray evaluation.”

You’ll be able to register for the free seminar right here.

September 13: Utilizing AM to Enhance Provide Chain Resiliency

At 2 pm EST on Tuesday, September thirteenth, the Additive Manufacturing Coalition and the USA Home of Representatives Manufacturing Caucus will current a joint Zoom discussion board on “How AM Can Enhance Provide Chain Resiliency.” Senator Gary Peters and Congressman Tim Ryan have been invited to current opening remarks, and the opposite audio system will likely be Tali Rosman, VP and Normal Supervisor of Xerox Elem Additive; James DeMuth, CEO of Seurat; and a consultant from America Makes.

“The AM Coalition and the Home Manufacturing Caucus (U.S Congress) are partnering to current an informative session on how additive manufacturing may considerably enhance the nation’s provide chain resiliency. Come learn the way.”

You’ll be able to RSVP for the dwell discussion board right here.

September 15: Velo3D’s Seeing is Believing Tour

This spring, Velo3D (NYSE: VLD) introduced its Seeing is Believing Additive Manufacturing Tour for Europe, which has visited a number of cities in France, the UK, Germany, and Italy. This Thursday the fifteenth, the tour heads to Toulouse, France at 12 pm CET, with arrivals, networking, and lunch at La Brasserie du Stade, adopted by a Velo3D presentation in Stade Toulousain, Salon 1 at 2 pm CET. Attendees will get an outline of the corporate’s end-to-end answer, together with its Stream Print Preparation Software program, Sapphire 3D printers, Guarantee High quality Management Answer, and the underlying Clever Fusion manufacturing course of. Actual-world examples of 3D printed components for patrons can even be on show, and attendees may also interact with Velo3D workers one-on-one and have their questions answered.

“Whether or not you’re new to steel additive manufacturing (AM) or have some expertise with typical AM applied sciences, our upcoming “Seeing is Believing” roadshow in Toulouse, France is the right alternative to learn the way Velo3D’s end-to-end answer is pushing the boundaries of what AM can obtain.

“Come and uncover how Velo3D may help unlock seemingly not possible designs, obtain better half efficiency, and assist present better half repeatability and provide chain flexibility.”

You’ll be able to register for the roadshow in Toulouse right here.

September 15: 3DHEALS on Biomaterials on 3D Printing

Lastly, 3DHEALS will maintain a webinar at 11 am EST on the fifteenth about “Biomaterials for 3D Printing.” Dr. Jenny Chen, the founder and CEO of 3DHEALS, will likely be moderating the webinar, and the audio system will likely be Guillaume de Calan, founder and CEO of Nanoe; Rao S. Bezwada, PhD, President and CEO of Bezwada Biomedical, LLC; Caroline Lauret, MSc, International Director Gross sales & Strategic Advertising and marketing at Evonik; Dr. Thiago Borges, Supervisor – Buyer Tasks at Evonik’s biomaterials middle; and Ben Hartkopp, CPO and Co-Founder, Quantica. There will likely be a chance for digital networking on Zoom after the webinar.

“Biomaterial science is likely one of the main pillars of the profitable development of 3D printed options for healthcare. On this webinar, we invited stakeholders from academia, business, bigger chemical and materials corporations, and rising startups to offer you a complete view of the place materials science know-how for healthcare 3D printing is at. We intention to offer info with sufficient breadth and depth that’s appropriate for each most of the people and business specialists.”

You’ll be able to register for the webinar right here.

Do you’ve got information to share about any future webinars or digital and dwell occasions? Please tell us!



RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Most Popular

Recent Comments